Accessories: Suspension Seatpost Installation

Updated by Lectric eBikes

Our suspension seatpost brings comfortability to any ride! Read the instructions below for installation and adjustment!

Suspension Seatpost Installation

  1. Disengage the seatpost collar clamp to remove the current seatpost.
  2. Use a 14mm wrench to loosen the nuts on the bottom of the saddle rails to separate the seat from the seatpost.
  3. Insert the new suspension seatpost into the saddle rails and repeat the process backward.

Adjusting the Suspension

  1. Remove the cap located at the bottom of the suspension seatpost by spinning in a counterclockwise motion.
  2. Use a 12 mm allen key to loosen or tighten the tension of the suspension coil. You can test the supsension by pushing down on the seatpost.
  3. Once the tension is to your desire, reinstall the cap and secure a tight fit by spinning clockwise

If you have any questions, please don't hesitate to contact our support team at contact@lectricebikes.com or (602) 715-0907

How did we do?

Powered by HelpDocs (opens in a new tab)