Accessories: Trunk Bag Installation Instructions

Updated by Lectric eBikes

Maximize the storage space on your rear rack with the Trunk Bag! Perfect for storing your on-the-go tools, or packing up a lunch for your picnic in the park.

Installing the Trunk Bag to the rear rack:
  1. Orient the bag so that the exterior cup holder is facing out, towards the rear of the bike.
  2. Then, undo all of the velcro on the bottom of the bag by pulling the straps apart.
  3. Next, if not already done, push the long end of the straps through the plastic tab on the other side.
  4. Place the bag on the rear rack with the velcro straps open.
  5. Then, loop the straps under the rack rails on both sides and press the velcro flat against the bottom for maximum contact. Press the strap with the plastic tab first and then press the other side to lock it into place. Repeat this process with the other strap.
  6. Perform a light pull test to ensure the Trunk Bag is secured to the rear rack.

If you have any questions, please don't hesitate to contact our support team at contact@lectricebikes.com or (602) 715-0907.

How did we do?

Powered by HelpDocs (opens in a new tab)