Accessories: Barrow Bar Installation

Updated 2 weeks ago by Lectric eBikes

Does your XPedition passenger want a set of handlebars of their own? The Barrow Bar will keep them comfortable and supported while they cruise alongside you!

Installing the Barrow Bar onto the dual-telescoping seat post:
  1. At the center of the Barrow Bar, there are 4 bolts. Use a 5mm Allen Key to remove the bolts from the securing plate.
  2. Next, place the center of the Bar on the top portion of the dual-telescoping seat post.
  3. Align the plate on the other side of the bar, enclosing the clamp on the seat post.
  4. Use a 5mm Allen key to thread the bolts through both plates until they are fully secure.
  5. Perform a light pull test to be sure the Barrow Bar is installed properly onto the seat post.
It is always the user’s responsibility to ensure a passenger and/or cargo loaded on the Lectric XPedition do not interfere or impact the user’s ability to safely operate the Lectric XPediton.

Please read the Lectric XPedition Owners Manual for more information.

If you have any questions, please don't hesitate to contact our support team at contact@lectricebikes.com or (602) 715-0907.


How did we do?


Powered by HelpDocs (opens in a new tab)