Accessories: Rear Rack Installation

Updated 1 month ago by Lectric eBikes

The XP™ Lite Rear Rack supports up to 55 lbs, making it the perfect addition to carry your belongings.

Check out this Quick Start Guide with written instructions to install the rear rack to your eBike:

  1. REMOVE THE TAILLIGHT;
    1. Follow the cable from the taillight, cut the zip ties and pull apart the quick plug connection.
    2. Using a 4mm Allen key, remove the taillight bracket from the bike frame. Then, remove the light from the taillight bracket with a 4mm Allen Wrench
  2. MOUNT REAR RACK; In order to mount the rear rack straight, the 4 bolts must be tightened in intervals.
    1. Use a 4mm allen key to mount the rear rack. Secure the rack at the insertion points diagonally.
    2. Begin tightening the bolt on the right side of the wheel as you tighten the bolt left of the taillight mounting point. Do not tighten all the way.
    3. Insert the bolts on the left side of the wheel and the right side of the taillight mounting point and tighten these halfway.
    4. Continue tightening the bolts in intervals diagonally to mount the rear rack straight.
  3. MOUNT TAILLIGHT TO RACK;
    1. Using the two bolts on the back of the taillight, mount the light to the back of the rear rack.
    2. Secure the quick plug/wire along the rack with a zip tie and replug the connection.

If you have any questions, please don't hesitate to contact our support team at contact@lectricebikes.com or (602) 715-0907.


How did we do?


Powered by HelpDocs (opens in a new tab)